! ==========================================================
! =================  Cover Information  ====================
! ==========================================================

 version = 1
 expt    = 'C2Mode Test at Q-band'
 expcode =  'k17ic02a'
 piname   = 'Ilje Cho'
 address1 = 'Korean VLBI Network'
 address2 = '776, Daedeok-daero, Yuseong-gu'
 address3 = 'Daejeon'
 address4 = '34055, KOREA'
 phone    = '+82 42 861 3292'
 obsphone = '+82 2 2012 7601'
 email    = ijcho@kasi.re.kr
 fax      = '+82 2 2012 7501'
 obsmode  = 'KaVA'
 obstype  = VLBI
 note1    = ' '
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
 
correl   = VLBADIFX
coravg   = 0.2, exact
corchan  = 256,2048
cornant  = 7
corpol   = off
corwtfn  = uniform
corsrcs  = standard
cortape  = NONE
corship1 = 'Ilje Cho'
corship2 = ''
corship3 = ''

! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!    Normally SCHED will not overwrite preexisting files. 
!    If you want this protection, comment this following line.
 overwrit

!sumitem  = el1, az1, pa1, early, dwell, slew, disk, tpstart
sumitem  = el1, az1, early, dwell, slew, disk, tpstart

! ==========================================================
! ======= Standard Source and Station Catalogs  ============
! ==========================================================
!  These are sched defaults so they are not really needed.

srcfile  = $SCHED/catalogs/sources.vlba
srcfile2  = $SCHED/catalogs/sources.pointing
freqfile = $SCHED/catalogs/freq.dat

! This requires SCHED 9.4 or greater.
stafile  = $SCHED/catalogs/stations_KJ.dat
locfile  = $SCHED/catalogs/locations_KJ.dat

!  stafile down with scans.

! Add a blank sky source to test noise levels, spurious correlation etc.
srccat /
   source='BLANKSKY' equinox='J2000'
     RA=16:42:58.8099550 DEC=  40:48:36.993945  CALCODE=' ' 
     REMARKS='Blank sky one degree from 3C345'
   /
endcat/
! ==========================================================
! =======================  Setup files  ====================
! ==========================================================
!
!
! KaVA Q-band 

setini = GEO1S /
  nchan    = 2
  bbfilt   = 128.0
  bits     = 2
  firstlo  = 34110.0
  freqref  = 43227.0
  freqoff  = 0.0, 0.0
  sideband = L,U
  ifchan   = R1,R1
  pol      = LCP
  bbc      = 1,1
  pcal     = 'off'
    /
endset /

setini = GEO1S_TPC /
  nchan    = 2
  bbfilt   = 128.0
  bits     = 2
  firstlo  = 34110.0
  freqref  = 43227.0
  freqoff  = 0.0, 0.0
  sideband = L,U
  ifchan   = R1,R1
  pol      = LCP
  bbc      = 1,1
  pcal     = 'off'
    /
endset /

! ==========================================================
! ========================  The Sources  =====================
! ==========================================================
!          

srccat /

!! Target Sources
SOURCE='3C84'    RA= 03:19:48.1601   DEC= 41:30:42.106   EQUINOX='J2000'/
SOURCE='DA55'    RA= 01:36:58.595    DEC= 47:51:29.100   EQUINOX='J2000'/

endcat /

! ==========================================================
! ========================  The Scans  =====================
! ==========================================================
!          Interferometer schedules
!          See comments near setup files for how to switch from
!          a Mark5A to a Mark5C schedule.

stations = KVNYS, KVNUS, KVNTN, VERAMZSW, VERAIRIK, VERAOGSW, VERAISGK


caltime = 30		! Tsys time
prestart = 0		!
minpause = 0		! mininum time for recording stop


! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================

year     = 2017
month    = 03
day      = 28
start    = 03:05:00

! ==========================================================

setup = GEO1S_TPC source='3C84' dur=59:00 gap=60/
setup = GEO1S source='DA55' dur=19:00 gap=60/

setup = GEO1S_TPC source='3C84' dur=59:00 gap=60/
setup = GEO1S source='DA55' dur=19:00 gap=60/

setup = GEO1S_TPC source='3C84' dur=59:00 gap=60/
setup = GEO1S source='DA55' dur=19:00 gap=60/

setup = GEO1S_TPC source='3C84' dur=59:00 gap=60/
setup = GEO1S source='DA55' dur=19:00 gap=60/

setup = GEO1S_TPC source='3C84' dur=59:00 gap=60/
setup = GEO1S source='DA55' dur=19:00 gap=60/

setup = GEO1S_TPC source='3C84' dur=59:00 gap=60/
setup = GEO1S source='DA55' dur=19:00 gap=60/